Exxsol D80, 163KG/drum

I. Product Introduction

Exxsol D80 is a dearomatized solvent oil with a distillation range of 205-237°C, a flash point of 81°C, a density of 0.794 g/cm³, a viscosity of 2.09 mm²/s (25°C), an aromatic content of <0.1%, a relative evaporation rate of 0.01 (n-BuAc=1), a KB value of 28, a bromine number of 18 mg/100g, a surface tension of 26 mN/m (25°C), and a refractive index of 1.438 (20°C). The product is packaged in iron drums with a specification of 163 kg/drum, and bulk supply is available for large quantities.

Exxsol D80 can be used as an industrial cleaning fluid (cleaning of metal products processing, machinery and machine parts, automotive manufacturing, electronic and electrical equipment, maintenance cleaning, blanket cleaning, fiber and leather degreasing/cleaning, and dry cleaning of clothing), metalworking fluid (casting fluid, stamping oil, cutting oil, electrical discharge machining fluid, aluminum rolling oil), solvent or diluent for decorative coatings (coatings for metal/plastic, wood coatings, marine coatings), solvent for consumer products (aerosol insecticide solvent), PVC viscosity reducer (PVC medical gloves, PVC wallpaper, adhesives), and carrier for PVC stabilizers.

The advantages of Exxsol D80 include: low odor, narrow distillation range, low viscosity, compatibility with most product surfaces, and it is not classified as hazardous during transportation.

II. Environmental Solvent Oil Exxsol D80 Quality Index Report

III. Precautions

1. ExxonMobil environmental solvent oil drums have an ExxonMobil anti-counterfeiting mark on the lid and an anti-counterfeiting barcode on the drum surface. Identify the brand to avoid counterfeits.

2. Environmental solvent oil should not be stored upright in outdoor environments to prevent contamination by moisture and impurities.

3. For indoor storage, place the drum upright with the top facing up for easy extraction.

4. Tighten the lid to keep the drum sealed.

5. Do not place flammable materials nearby. Open flames are strictly prohibited, and do not bring ignition sources near the drum.

6. Flammable specialty oils or chemical solvents should be stored separately and marked with flammable material labels.